manualshive.com logo in svg

Agilent Technologies 86100A, Руководство программиста, Страница: 251 / 366

Поделиться
Скачать
Agilent Technologies 86100A Скачать руководство пользователя страница 251

18-9

Measure Commands

AMPLitude:RINoise:DEF

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:RINOISE? OLEVel”

Returned Format

[:MEASure:AMPLitude:RINoise] <value><NL>

AMPLitude:RINoise:DEF

Command

MEASure:AMPLitude:RINoise:DEF {OMAMplitude | OLEVel}

Defines the type of RIN measurement performed. 

OLEVel

 specifies a RIN measurement that is 

based on the one level. 

OMAMplitude 

specifies a RIN OMA measurement. 

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:RINOISE:DEF OMAMplitude”

Query

Returns the type of RIN measurement currently selected.

MEASure:AMPLitude:RINoise:DEF?

Returned Format

[:MEASure:AMPLitude:RINoise:DEF] {OMAMplitude | OLEVel}<NL>

AMPLitude:RINoise:UNITs

Command

MEASure:AMPLitude:RINoise:UNITs { DB | DBHZ }

Specifies the units for the Random Intensity Noise (RIN) measurement. The measurement is 
only available for optical signals.  Units of dB/Hz are only available when a reference filter is in 
use.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:RINOISE:UNITS DB”

Query

MEASure:AMPLitude:RINoise:UNITs?

Returned Format

[:MEASure:AMPLitude:RINoise:UNITs] { DB | DBHZ }<NL>

AMPLitude:RN?

Query

MEASure:AMPLitude:RN? {ONE | ZERO}

Returns the random noise measurement for the specified logic level. Uses the current noise 
and interference units.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:RN? ONE”

Returned Format

[:MEASure:AMPLitude:RN] <value><NL>

AMPLitude:RNSTabilize

Command

MEASure:AMPLitude:RNSTabilize {ON | 1 | OFF | 0}

Turns the RN stabilization on or off.

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов