manualshive.com logo in svg

Agilent Technologies 86100A, Руководство программиста, Страница: 101 / 366

Поделиться
Скачать
Agilent Technologies 86100A Скачать руководство пользователя страница 101

3-7

Common Commands

*OPT? (Option)

The *OPC query allows synchronization between the computer and the analyzer by using the 
message available (MAV) bit in the Status Byte, or by reading the output queue. Unlike the 
*OPC command, the *OPC query does not affect the OPC Event bit in the Standard Event 
Status Register.

N O T E

If instrument conditions have been set that can not be met, and the *OPC? is sent out, the instrument will not 
continue remote execution. Under these circumstances, the user must send a device clear or power down to 
restart the instrument. 

*OPT? (Option)

Query

*OPT? 

The OPT? query returns a string with a list of installed hardware and software options. The 
query returns a 1 as the first character if option 001 (divided trigger - 12 GHz) is installed. If 
no options are installed, the string will have a 0 as the first character. The length of the 
returned string may increase as options become available in the future. Once implemented, 
an option name will be appended to the end of the returned string, delimited by a comma. 

Restrictions

In software revisions A.05.00 and below, the query returns a list of any hardware options but 
does not include any software options.

Example

10 OUTPUT 707;"*OPT?"

*RCL (Recall)

Command

*RCL <register>

The *RCL command restores the state of the analyzer to a setup previously stored in the 
specified save/recall register. An analyzer setup must have been stored previously in the 
specified register. Registers 0 through 9 are general-purpose registers and can be used by the 
*RCL command. <register> is an integer, 0 through 9, specifying the save/recall register that 
contains the analyzer setup you want to recall.

Example

10 OUTPUT 707;"*RCL 3"

See Also

SAVe. An error message appears on the analyzer display if nothing has been previously saved 
in the specified register.

*RST (Reset)

Command

*RST

The *RST command places the analyzer in a known state. 

Table 3-4

 lists the reset conditions 

as they relate to the analyzer commands. This is the same as using the front-panel default 
setup button.

Example

10 OUTPUT 707;"*RST"

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов