manualshive.com logo in svg

Agilent Technologies 86100A, Руководство программиста, Страница: 253 / 366

Поделиться
Скачать
Agilent Technologies 86100A Скачать руководство пользователя страница 253

18-11

Measure Commands

AMPLitude:UNITs

Query

MEASure:AMPLitude:TI:DEFine?

Returned Format

[:MEASure:AMPLitude:TI:DEFine] <ber_level><NL>

AMPLitude:UNITs

Command

MEASure:AMPLitude:UNITs {CHANnel | UAMPlitude}

Sets and queries the units of the noise and interference measurements.  The units can be set 
either to the current vertical channel units or to unit amplitude. If the units are unit ampli-
tude, the measurements are normalized to the signal amplitude.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:UNITS CHANNEL”

Query

MEASure:AMPLitude:UNITs?

Returned Format

[:MEASure:AMPLitude:UNITs] {CHANnel | UAMPlitude}<NL>

AMPLitude:ZLEVel?

Query

MEASure:AMPLitude:ZLEVel?

Returns the zero level measurement  Always uses the vertical units of the channel. Use 

“AMPLitude:OLEVel?” on page 18-7

 to return the one level measurement.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Returned Format

[:MEASure:AMPLitude:ZLEVel] <value><NL>

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:ZLEVEL?”

ANNotation

Command

:MEASure:ANNotation {ON | 1 | OFF | 0}

Turns measurement annotations on or off. If there are no active measurements, you can still 
turn on or off measurement annotations. The instrument will remain in the defined state and 
will be activated (if on) the next time measurements are performed.

Mode

All instrument modes.

Query

:MEASure:ANNotation?

The query returns the current measurement annotation state.

Returned Format

[:MEASure:ANNotation] {1 | 0}

Example

10 OUTPUT 707;”:MEASURE:ANNOTATION ON”

APOWer

Command

:MEASure:APOWer <units> [,<source>]

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов