Agilent Technologies 86100A Скачать руководство пользователя страница 249 | Manualshive

Страница: 249 / 366

Agilent Technologies 86100A Скачать руководство пользователя страница 249

18-7

Measure Commands

AMPLitude:LEVel:CIDigits:LEADing

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:LEVEL:CIDIGITS:LAGGING 5”

Query

MEASure:AMPLitude:LEVel:CIDigits:LAGGing?

Returned Format

[:MEASure:AMPLitude:LEVel:CIDigits:LAGGing] <num_digits><NL>

AMPLitude:LEVel:CIDigits:LEADing

Command

MEASure:AMPLitude:LEVel:CIDigits:LEADing <num_digits>

Specifies the minimum number of leading consecutive identical digits to be uses in defining
the one and zero levels.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:LEVEL:CIDIGITS:LEADING 5”

Query

MEASure:AMPLitude:LEVel:CIDigits:LEADing?

Returned Format

[:MEASure:AMPLitude:LEVel:CIDigits:LEADing] <num_digits><NL>

AMPLitude:LEVel:DEFine

Command

MEASure:AMPLitude:LEVel:DEFine {AVERage | CIDigits}

Specifies whether the one and zero levels are defined as the average one and zero levels, or
whether they are specified in terms of a minimum number of consecutive identical digits.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:LEVEL:DEFINE AVERAGE”

Query

MEASure:AMPLitude:LEVel:DEFine?

Returned Format

[:MEASure:AMPLitude:LEVel:DEFine] {AVERage | CIDigits}<NL>

AMPLitude:LOCation

Command

MEASure:AMPLitude:LOCation <location_value>

Specifies the location within the unit interval at which the noise and interference will be mea-
sured. The location is specified as a percentage. 0% corresponds to the left crossing point,
100% corresponds to the right crossing point, and 50% (the default) corresponds to the cen-
ter of the eye. The specified location must be within the range of 5.0% and 95.0%.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:LOCATION 25”

Query

MEASure:AMPLitude:LOCation?

Returned Format

[:MEASure:AMPLitude:LOCation] <location_value><NL>

AMPLitude:OLEVel?

Query

MEASure:AMPLitude:OLEVel?

«
...
247
248
249
250
251
...
»

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов