Adash 4400 VA4 Pro Скачать руководство пользователя страница 10

Страница: 10 / 124

ADASH Ltd.

Adash 4400 – VA4Pro

For further technical and contact information visit www.adash.eu, email: [email protected]

General information

The switch-on

Use the POWER button for switch-on (older versions had the button in different position as in the picture).

The green LED on the front panel ( right at the top) lights after switch-on.

The switch off

The switching off can be done by:
- Power Off button on the main screen,
- in the Global menu is the Power Off item available.

Auto switch off

If no button is pushed in 5 minutes from switching on, the unit will be switched off.

The emergency switch off

This is not correct method to switch off the instrument. Using it can cause data corruption. Use this method only
in case of emergency (eg. when the system freezes).
Push and hold the POWER button for about 5 seconds. Instrument will switch off.

Disc free capacity warning

If this warning message appears, you need to get free disc space by removing the measurements, routes or
records, which are not actual.

Содержание 4400 VA4 Pro





























































































































Результаты поиска

Содержание 4400 VA4 Pro

Отзывы:

Похожие инструкции для 4400 VA4 Pro

Бренды по названию

Популярные бренды

Adash 4400 VA4 Pro, Руководство пользователя

Результаты поиска

Содержание 4400 VA4 Pro

Отзывы:

Похожие инструкции для 4400 VA4 Pro

Бренды по названию

Популярные бренды