ZyXEL Communications X2002 User Manual Download Page 489

Page: 489 / 562

X2002 User’s Guide

489

H A P T E R

3 8

Troubleshooting

This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.

•

Power, Hardware Connections, and LEDs

•

X2002 Access and Login

•

Internet Access

•

Advanced Features

•

Reset the X2002 to Its Factory Defaults

•

The Console Port

38.1 Power, Hardware Connections, and LEDs

The X2002 does not turn on. None of the LEDs turn on.

Make sure the X2002 is turned on.

Make sure you are using the power adaptor or cord included with the X2002.

Make sure the power adaptor or cord is connected to the X2002 and plugged in to
an appropriate power source. Make sure the power source is turned on.

Turn the X2002 off and on.

Disconnect and re-connect the power adaptor or cord to the X2002.

If the problem continues, contact the vendor.

Summary of Contents for X2002



















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for X2002

Reviews:

Related manuals for X2002

Brands by name

Popular brands

ZyXEL Communications X2002, User Manual

Search results

Summary of Contents for X2002

Reviews:

Related manuals for X2002

Brands by name

Popular brands