ZyXEL Communications X2002, User Manual

Page: 146 / 562

Chapter 6 Server
X2002 User’s Guide
146
6.11 The Peer to Peer Screen
Use this screen to allow the X2002 to set up a direct connection between two IP
phones on the same subnet. This allows the X2002 to remain free of the
bandwidth burden of managing the call. When a special feature request is made
by either end of the connection, such as call parking or music on hold, then the
X2002 re-establishes control of the connection to implement the feature.
This feature can only be used for phones on the same localnet table.
Click Configuration > PBX > Server Configuration > Server > Peer to Peer
to view the screen as shown next.
Figure 65 Server > Peer-to-Peer
Each field is described in the following table.
Table 31 Server > Peer-to-Peer
LABEL DESCRIPTION
Peer to Peer
Peer to Peer Select Disable to turn this feature off or Enable to turn it on.
By default, the Peer-to-Peer feature is disabled.
If you enable it, you should set up the
Local Net for Peer to Peer .
Local Net for Peer to Peer
Delete Click this to delete the selected item(s) in this list.
Select Check this box to mark an item in this list for deletion.
Local Net for
Peer to Peer
This displays the IP address and port number that is allowed to
participate in peer-to-peer calls.
Add Click this to add a new entry to the local net list.
Apply Click this to save your changes.
Reset Click this to set every field in this screen to its last-saved value.