ZyXEL Communications X2002 User Manual Download Page 543

Page: 543 / 562

Appendix B Open Software Announcements

X2002 User’s Guide

543

under the terms of any subsequent version of the license

published by the PHP Group. No one other than the PHP Group has

the right to modify the terms applicable to covered code created

under this License.

6. Redistributions of any form whatsoever must retain the following

acknowledgment:

"This product includes PHP software, freely available from

<http://www.php.net/software/>".

THIS SOFTWARE IS PROVIDED BY THE PHP DEVELOPMENT TEAM ``AS IS'' AND

ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE PHP

DEVELOPMENT TEAM OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED

OF THE POSSIBILITY OF SUCH DAMAGE.

--------------------------------------------------------------------

This software consists of voluntary contributions made by many

individuals on behalf of the PHP Group.

The PHP Group can be contacted via Email at [email protected].

For more information on the PHP Group and the PHP project,

Summary of Contents for X2002



















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for X2002

Reviews:

Related manuals for X2002

Brands by name

Popular brands

ZyXEL Communications X2002, User Manual

Search results

Summary of Contents for X2002

Reviews:

Related manuals for X2002

Brands by name

Popular brands