ZyXEL Communications X2002, User Manual

Page: 438 / 562

Chapter 32 Remote Management
X2002 User’s Guide
438
32.6.1 CTI: Add/Edit
Use this screen to add trusted ZyXEL CTI-compatible SIP phone(s) which is
allowed to access your X2002. Click the add or edit icon in the
Maintenance >
Administration > Remote Management > CTI screen.
Figure 262 CTI > Add/Edit
The following table describes the labels in this screen.
32.7 Remote Management Technical Reference
HTTPS Example
If you haven’t changed the default HTTPS port on the X2002, then in your browser
enter “https://X2002 IP Address/” as the web site address where “X2002 IP
Address” is the IP address or domain name of the X2002 you wish to access.
Internet Explorer Warning Messages
When you attempt to access the X2002 HTTPS server, a Windows dialog box pops
up asking if you trust the server certificate. Click
View Certificate if you want to
verify that the certificate is from the X2002.
Table 181 CTI > Add/Edit
LABEL DESCRIPTION
Access
Interface Select the interface(s) through which ZyXEL CTI-compatible SIP
phone(s) may access the X2002 using this service. Select
ALL to allow
the specified device(s) to access the X2002 through either LAN or WAN
interface.
Address Type Select ALL to allow any CTI-compatible devices to access the X2002.
Select Host and specify the IP address of a trusted device to allow it to
access the X2002.
Select Subnet and specify the IP addresses of a trusted subnet to allow
all CTI-compatible devices from the subnet network to access the
X2002.
Apply Click this to save your changes and to apply them to the X2002.
Cancel Click this to begin configuring the fields again.