ZyXEL Communications X2002 User Manual Download Page 540 | Manualshive

Page: 540 / 562

background image

Appendix B Open Software Announcements

X2002 User’s Guide

540

C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R.
227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users
acquire Covered Code with only those rights set forth herein.

11. Miscellaneous

This License represents the complete agreement concerning subject matter
hereof. If any provision of this License is held to be unenforceable, such provision
shall be reformed only to the extent necessary to make it enforceable. This
License shall be governed by California law provisions (except to the extent
applicable law, if any, provides otherwise), excluding its conflict-of-law provisions.
With respect to disputes in which at least one party is a citizen of, or an entity
chartered or registered to do business in the United States of America, any
litigation relating to this License shall be subject to the jurisdiction of the Federal
Courts of the Northern District of California, with venue lying in Santa Clara
County, California, with the losing party responsible for costs, including without
limitation, court costs and reasonable attorneys' fees and expenses. The
application of the United Nations Convention on Contracts for the International
Sale of Goods is expressly excluded. Any law or regulation which provides that the
language of a contract shall be construed against the drafter shall not apply to this
License.

12. Responsibility for claims

As between Initial Developer and the Contributors, each party is responsible for
claims and damages arising, directly or indirectly, out of its utilization of rights
under this License and You agree to work with Initial Developer and Contributors
to distribute such responsibility on an equitable basis. Nothing herein is intended
or shall be deemed to constitute any admission of liability.

13. Multiple-licensed code

Initial Developer may designate portions of the Covered Code as "Multiple-
Licensed". "Multiple-Licensed" means that the Initial Developer permits you to
utilize portions of the Covered Code under Your choice of the MPL or the
alternative licenses, if any, specified by the Initial Developer in the file described in
Exhibit A.

Exhibit A - Mozilla Public License.

"The contents of this file are subject to the Mozilla Public License

Version 1.1 (the "License"); you may not use this file except in

compliance with the License. You may obtain a copy of the License at

http://www.mozilla.org/MPL/

«
...
538
539
540
541
542
...
»

Summary of Contents for X2002



















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for X2002

Brand: New Rock Technologies Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands