ZyXEL Communications Prestige 662HW Series, User Manual

Page: 275 / 458

Prestige 662HW Series User’s Guide
Remote Node Configuration 28-3
Figure 28-2 Menu 11.1 Remote Node Profile
In Menu 11.1 – Remote Node Profile , fill in the fields as described in the following table.
Table 28-1 Menu 11.1 Remote Node Profile
FIELD DESCRIPTION EXAMPLE
Rem Node Name Type a unique, descriptive name of up to eight characters for this node. MyIsp
Active Press [SPACE BAR] and then [ENTER] to select Yes to activate or No to
deactivate this node. Inactive nodes are displayed with a minus sign “–“ in
SMT menu 11.
Yes
Encapsulation PPPoA refers to RFC-2364 (PPP Encapsulation over ATM Adaptation
Layer 5).
If RFC-1483 (Multiprotocol Encapsulation over ATM Adaptation Layer 5) of
ENET ENCAP are selected,
then the Rem Login , Rem Password , My Login , My Password and
Authen fields are not applicable ( N/A ).
ENET
ENCAP
Multiplexing Press [SPACE BAR] and then [ENTER] to select the method of
multiplexing that your ISP uses, either
VC-based or LLC-based .
LLC-based
Service Name When using PPPoE encapsulation, type the name of your PPPoE service
here.
N/A
Incoming:
Rem Login Type the login name that this remote node will use to call your Prestige.
The login name and the
Rem Password will be used to authenticate this
node.
Rem Password Type the password used when this remote node calls your Prestige.
Outgoing:
My Login Type the login name assigned by your ISP when the Prestige calls this
remote node.
My Password Type the password assigned by your ISP when the Prestige calls this
remote node.
Menu 11.1 - Remote Node Profile
Rem Node Name= MyISP Route= IP
Active= Yes Bridge= No
Encapsulation= RFC 1483
Edit IP/Bridge= No
Multiplexing= LLC-based Edit ATM Options= No
Service Name= N/A Edit Advance Options= N/A
Incoming: Telco Option:
Rem Login= N/A Allocated Budget(min)= N/A
Rem Password= N/A Period(hr)= N/A
Outgoing: Schedule Sets= N/A
My Login= N/A Nailed-Up Connection= N/A
My Password= N/A Session Options:
Authen= N/A
Edit Filter Sets= No
Idle Timeout(sec)= N/A
Press ENTER to Confirm or ESC to Cancel:
Edit IP/Bridge
Options in menu
11.3.
Edit ATM Options
in menu 11.6
Edit Filter Sets in
menu 11.5.