ZyXEL Communications Prestige 662HW Series, User Manual

Page: 327 / 458

Prestige 662HW Series User’s Guide
SNMP Configuration 34-3
FIELD DESCRIPTION EXAMPLE
Community Type the trap community, which is the password sent with each trap to
the SNMP manager. public
Destination Type the IP address of the station to send your SNMP traps to. 0.0.0.0
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel”
to save your configuration or press [ESC] to cancel and go back to the previous screen.
34.4 SNMP Traps
The Prestige will send traps to the SNMP manager when any one of the following events occurs:
Table 34-2 SNMP Traps
TRAP # TRAP NAME DESCRIPTION
1 coldStart ( defined in RFC-1215 ) A trap is sent after booting (power on).
2 warmStart ( defined in RFC-1215 ) A trap is sent after booting (software reboot).
3 linkDown ( defined in RFC-1215 ) A trap is sent with the port number when any of the links are
down. See the following table.
4 linkUp ( defined in RFC-1215 ) A trap is sent with the port number.
5 authenticationFailure ( defined in
RFC-1215 )
A trap is sent to the manager when receiving any SNMP gets
or sets requirements with wrong community (password).
6 whyReboot (defined in ZYXEL-MIB) A trap is sent with the reason of restart before rebooting
when the system is going to restart (warm start).
6a For intentional reboot : A trap is sent with the message "System reboot by user!" if
reboot is done intentionally, (for example, download new files,
CI command "sys reboot", etc.).
The port number is its interface index under the interface group.
Table 34-3 Ports and Permanent Virtual Circuits
PORT PVC (PERMANENT VIRTUAL CIRCUIT)
1 Ethernet LAN
2 1
3 2
… …
13 12
14 xDSL