ZyXEL Communications Prestige 662HW Series, User Manual

Page: 282 / 458

Prestige 662HW Series User’s Guide
28-10 Remote Node Configuration
Move the cursor to the Edit Advance Options field, press
[SPACE BAR]
to select
Yes
, then press
[ENTER] to display Menu 11.8 – Advance Setup Options .
Figure 28-10 Menu 11.8 Advance Setup Options
The following table describes the fields in this menu.
Table 28-3 Menu 11.8 Advance Setup Options
FIELD DESCRIPTION
PPPoE pass-through Press [SPACE BAR] to select Yes and press [ENTER] to enable PPPoE pass through. In
addition to the Prestige's built-in PPPoE client, you can enable PPPoE pass through to
allow up to ten hosts on the LAN to use PPPoE client software on their computers to
connect to the ISP via the Prestige. Each host can have a separate account and a public
WAN IP address.
PPPoE pass through is an alternative to NAT for applications where NAT is not
appropriate.
Press [SPACE BAR] to select No and press [ENTER] to disable PPPoE pass through if
you do not need to allow hosts on the LAN to use PPPoE client software on their
computers to connect to the ISP.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel”
to save your configuration or press [ESC] to cancel and go back to the previous screen.
Menu 11.8 - Advance Setup Options
PPPoE pass-through= No
Press ENTER to Confirm or ESC to Cancel: