ZyXEL Communications Prestige 662HW Series, User Manual

Page: 257 / 458

Prestige 662HW Series User’s Guide
Menu 2 WAN Backup Setup 24-5
Table 24-4 Menu 2.2.1 Advanced Dial Backup Setup: AT Commands Fields
FIELD DESCRIPTION EXAMPLE
CLID (Calling Line
Identification) Enter the keyword that precedes the CLID (Calling Line Identification) in the
AT response string. This lets the Prestige capture the CLID in the AT
response string that comes from the WAN device. CLID is required for CLID
authentication. NMBR =
Called Id Enter the keyword preceding the dialed number. TO
Speed Enter the keyword preceding the connection speed. CONNECT
Table 24-5 Menu 2.2.1 Advanced Dial Backup Setup: Call Control Parameters
FIELD DESCRIPTION EXAMPLE
Call Control
Dial Timeout (sec) Enter a number of seconds for the Prestige to keep trying to set up an
outgoing call before timing out (stopping). The Prestige times out and
stops if it cannot set up an outgoing call within the timeout value.
60 seconds
Retry Count Enter a number of times for the Prestige to retry a busy or no-answer
phone number before blacklisting the number.
0 to disable
the blacklist
control
Retry Interval (sec) Enter a number of seconds for the Prestige to wait before trying another
call after a call has failed. This applies before a phone number is
blacklisted.
Drop Timeout (sec) Enter a number of seconds for the Prestige to wait before dropping the
DTR signal if it does not receive a positive disconnect confirmation.
20 seconds
Call Back Delay
(sec)
Enter a number of seconds for the Prestige to wait between dropping a
callback request call and dialing the co-responding callback call. 15 seconds