ZyXEL Communications Prestige 662HW Series, User Manual

Page: 298 / 458

Prestige 662HW Series User’s Guide
31-8 Network Address Translation (NAT)
Table 31-4 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set
FIELD DESCRIPTION EXAMPLE
End This is the ending local IP address (ILA). If the rule is for all local IPs, then
put the Start IP as 0.0.0.0 and the End IP as 255.255.255.255. This field is
N/A for One-to-One and Server types.
N/A
Global IP
Start This is the starting inside global IP address (IGA). If you have a dynamic IP,
enter 0.0.0.0 as the
Global IP Start . Note that Global IP Start can be set to
0.0.0.0 only if the types are Many-to-One or Server .
0.0.0.0
End This is the ending inside global IP address (IGA). This field is N/A for One-to-
One , Many-to-One and Server types .
N/A
Server
Mapping Set Only available when Type is set to Server . Type a number from 1 to 10 to
choose a server set from menu 15.2.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel”
to save your configuration or press [ESC] to cancel and go back to the previous screen.
31.4 Configuring a Server behind NAT
Follow these steps to configure a server behind NAT:
1.
Enter 15 in the main menu to go to Menu 15 - NAT Setup .
2.
Enter 2 to display Menu 15.2 - NAT Server Sets as shown next.
Figure 31-8 Menu 15.2 NAT Server Setup
3.
Enter 1 to go to Menu 15.2.1 NAT Server Setup as follows.
Menu 15.2 - NAT Server Sets
1. Server Set 1 (Used for SUA Only)
2. Server Set 2
3. Server Set 3
4. Server Set 4
5. Server Set 5
6. Server Set 6
7. Server Set 7
8. Server Set 8
9. Server Set 9
10. Server Set 10
Enter Set Number to Edit: