ZyXEL Communications Prestige 662HW Series, User Manual

Page: 338 / 458

Prestige 662HW Series User’s Guide
36-4 System Information and Diagnosis
The following table describes the fields in this menu.
Table 36-2 Menu 24.2.1 System Maintenance: Information
FIELD DESCRIPTION
Name Displays the system name of your Prestige. This information can be changed in Menu 1 –
General Setup .
Routing Refers to the routing protocol used.
ZyNOS F/W Version Refers to the ZyNOS (ZyXEL Network Operating System) system firmware version.
ZyNOS is a registered trademark of ZyXEL Communications Corporation.
ADSL Chipset Vendor Displays the vendor of the ADSL chipset and DSL version.
Standard This refers to the operational protocol the Prestige and the DSLAM (Digital Subscriber
Line Access Multiplexer) are using.
LAN
Ethernet Address Refers to the Ethernet MAC (Media Access Control) of your Prestige.
IP Address This is the IP address of the Prestige in dotted decimal notation.
IP Mask This shows the subnet mask of the Prestige.
DHCP This field shows the DHCP setting (None, Relay or Server) of the Prestige.
36.3.2 Console Port Speed
You can set up different port speeds for the console port through Menu 24.2.2 – System Maintenance
– Console Port Speed . Your Prestige supports 9600 (default), 19200, 38400, 57600 and 115200 bps.
Press [ SPACE BAR ] and then [ENTER] to select the desired speed in menu 24.2.2, as shown in the
following figure.
Figure 36-5 Menu 24.2.2 System Maintenance : Change Console Port Speed
Once you change the Prestige consol port speed, you must also set the speed parameter for the
communication software you are using to connect to the Prestige.
36.4 Log and Trace
There are two logging facilities in the Prestige. The first is the error logs and trace records that are
stored locally. The second is the UNIX syslog facility for message logging.
36.4.1 Viewing Error Log
The first place you should look for clues when something goes wrong is the error log. Follow the
procedures to view the local error/trace log:
1.
Type 24 in the main menu to display Menu 24 – System Maintenance .
Menu 24.2.2 – System Maintenance – Change Console Port Speed
Console Port Speed: 9600
Press ENTER to Confirm or ESC to Cancel: