ZyXEL Communications Prestige 662HW Series, User Manual

Page: 326 / 458

Prestige 662HW Series User’s Guide
34-2 SNMP Configuration
•
Get - Allows the manager to retrieve an object variable from the agent.
•
GetNext - Allows the manager to retrieve the next object variable from a table or list within an
agent. In SNMPv1, when a manager wants to retrieve all elements of a table from an agent, it
initiates a Get operation, followed by a series of GetNext operations.
•
Set - Allows the manager to set values for object variables within an agent.
•
Trap - Used by the agent to inform the manager of some events.
34.2 Supported MIBs
The Prestige supports RFC-1215 and MIB II as defined in RFC-1213 as well as ZyXEL private MIBs.
The focus of the MIBs is to let administrators collect statistic data and monitor status and
performance.
34.3 SNMP Configuration
To configure SNMP, select option 22 from the main menu to open Menu 22 — SNMP
Configuration as shown next. The “community” for Get, Set and Trap fields is SNMP terminology
for password.
Figure 34-2 Menu 22 SNMP Configuration
The following table describes the SNMP configuration parameters.
Table 34-1 Menu 22 SNMP Configuration
FIELD DESCRIPTION EXAMPLE
SNMP:
Get Community Type the Get Community , which is the password for the incoming Get-
and GetNext requests from the management station.
public
Set Community Type the Set community, which is the password for incoming Set
requests from the management station.
public
Trusted Host If you enter a trusted host, your Prestige will only respond to SNMP
messages from this address. A blank (default) field means your Prestige
will respond to all SNMP messages it receives, regardless of source. 0.0.0.0
Trap:
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: