Prestige 662HW Series User’s Guide
IP Policy Routing
40-7
2.
Create a rule for this set in
Menu 25.1.1 — IP Routing Policy
as shown next.
Figure 40-7 IP Routing Policy Example
3.
Check
Menu 25.1 — IP Routing Policy Setup
to see if the rule is added correctly.
4.
Create another policy set in menu 25.
5.
Create a rule in menu 25.1 for this set to route packets from any host (IP=0.0.0.0 means any host)
with protocol TCP and port FTP access through another gateway (192.168.1.100).
Menu 25.1.1 - IP Routing Policy
Policy Set Name= set1
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Don't Care
Packet length= 10
Precedence = Don't Care
Len Comp= N/A
Source:
addr start= 192.168.1.2
end= 192.168.1.64
port start= 0
end= N/A
Destination:
addr start= 0.0.0.0 end= N/A
port start= 80 end= 80
Action= Matched
Gateway addr = 192.168.1.1 Log= No
Type of Service= No Change
Precedence = No Change
Press ENTER to Confirm or ESC to Cancel:
Summary of Contents for Prestige 662HW Series
