ZyXEL Communications Prestige 662HW Series, User Manual

Page: 245 / 458

Prestige 662HW Series User’s Guide
Introducing the SMT 22-1
Chapter 22
Introducing the SMT
This chapter explains how to access and navigate the System Management Terminal and
gives an overview of its menus.
22.1 SMT Introduction
T he Prestige’s SMT (System Management Terminal) is a menu-driven interface that you can access
from a terminal emulator over a telnet connection. This chapter shows you how to access the SMT
(System Management Terminal) menus via Telnet, how to navigate the SMT and how to configure
SMT menus.
22.1.1 Procedure for SMT Configuration via Telnet
The following procedure details how to telnet into your Prestige.
1.
In Windows, click Start (usually in the bottom left corner), Run and then type “telnet 192.168.1.1”
(the default IP address) and click OK .
2.
Enter “1234” in the Password field.
3.
After entering the password you will see the main menu.
Please note that if there is no activity for longer than five minutes (default timeout period) after you
log in, your Prestige will automatically log you out. You will then have to telnet into the Prestige
again.
22.1.2 Entering Password
The login screen appears after you press [ENTER] , prompting you to enter the password, as shown
next.
For your first login, enter the default password “1234”. As you type the password, the screen displays
an asterisk “*” for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your Prestige will
automatically log you out.
Figure 22-1 Login Screen
22.1.3 Prestige SMT Menu Overview
We use the Prestige 662HW-61 SMT menus in this guide as an example. The SMT menus vary
slightly for different Prestige models.
The following figure gives you an overview of the various SMT menu screens of your Prestige.
Enter Password : ****