3-6
Performance Level Switch
(X/MX Dirt)
The performance level is a two position switch that
toggles between “I” and “II”. To select either of the
switch positions, the motorcycle must be stopped
and the key switch in the OFF position.
C. Motor Temperature Indicator
The motor temperature sensor senses the
temperature of the motor and power pack. This will
trigger the motor temperature indicator, which will
blink in the unlikely event that you exceed the
motorcycle’s performance capabilities. See Motor
Temperature Indicator on page 6-11.
D. System Warning Indicator
In the unlikely event you exceed the motorcycle’s
performance capabilities, the indicator will flash and
gently oscillate the motor output to notify the rider.
Back off of the throttle to reduce heat and eliminate
the oscillation. Doing so will also eliminate the
indicator flashing. If the red LED is flashing, the
system has detected a fault. For troubleshooting, see
section 6.
The “I” position reduces the acceleration of the
motorcycle to be less aggressive. It is an ideal
position to use for times when you want softer
acceleration. This position is also good for newer
riders and for extending range.
The “II” position causes the motorcycle to accelerate
at a significantly faster rate. This position is
recommended for advanced riders.
Those who take advantage of the “II” position are
likely to see a slightly reduced range.
A.
Performance Level Switch
IGN
IT
IO
N
OFF
ON
A
