5-15
A
5.
Install the headlight bulb into the lens.
6.
Install the headlight spring clip.
7.
Install the headlight bulb cover.
8.
Connect the headlight connector and install the
headlight into the housing.
9.
Install the headlight trim ring with gasket and
install the trim ring screws.
Turn Signal Light Bulb Replacement
1.
Remove the turn signal lens screw (A) and
remove the lens.
2.
Push in on the bulb, turn the bulb counter-
clockwise, and then pull the bulb out.
3.
Insert the new bulb into the socket, push in and
turn clockwise until it stops.
4.
Install the lens and screw; tighten the screw. Do
not over-tighten the screw otherwise the lens may
break.
