3-8
A and F. Turn Signals
An arrow on the instrument panel
will flash green in the same
direction as selected by the turn
signal switch. This will remain
on until the turn signal request
has been canceled.
B. High Beam
When the headlight high beams
are on, this indicator will
illuminate blue and will remain
on until the high beams are
turned off.
C. Main Power Indicator
The main power indicator is ON any time the key
is in the ON position.
D. System Warning Indicator
This indicator will blink when a
system error has been detected.
See System Warning Indicator on
page 6-8 for more information.
Indicators
E. Motor Temperature Indicator
The motor temperature sensor
senses the temperature of the
motor and power pack. This will
trigger the motor temperature
indicator, which will blink in the
unlikely event that you exceed the
motorcycle’s performance
capabilities. See Motor Temperature Indicator on page
6-11.
G. Select Button
By pressing the select button you can toggle between
Ride Time and Total Hours displayed.
H. Adjust Button
By pressing the adjust button you can toggle
between the odometer, trip odometer setting A, trip
odometer setting B, RPM and Max. Holding it down
will clear the trip odometer resetting it back to zero.
I. Display Area
The backlit digital display displays the following: Ride
Time, Total Hours, Odometer, Trip Odometer, RPM
and Motorcycle Speed.
J. Charge Indicator
This displays the amount of energy remaining in the
power pack, similar to the fuel gauge on a gasoline
powered vehicle.
