4-18
Quick Charging
Quick charging is an option that contains a
stand-alone charger (A) and dual charger harness
(B). It is used in conjunction with the charger
supplied with the motorcycle (C) or the XU’s
integrated charger. The XU requires a CSC installed
quick charge harness. Using two chargers and the
quick charging harness to charge the power pack
shortens the charging time to about 1.2 hours.
(Not Installed in Motorcycle)
1.
Remove the power pack from the motorcycle. See
Power Pack Swapping on page 4-8.
2.
Connect the quick charger harness and both
chargers to the power pack.
3.
Always connect the chargers to a GROUNDED
outlet. When using an extension cord, avoid
excessive voltage drops by using a grounded,
3-wire, 12-AWG cord no longer than 7.6 m (25 ft).
The charger can be used on 120 V AC or 240 V
AC current. The voltage does not change the
amount of time that the motorcycle takes to
charge.
C
A
B
