3-14
A
B
A
B
B. Headlight High/Low Beam
Switch
When the switch is pushed, the
headlight will change from low
beam to high beam. It will stay
in the selected position until it is
switched back. When in high
beam position, the high beam indicator on the
instrument panel will illuminate.
C. Front Brake Lever
The front brake lever controls the front brake when
the lever is squeezed. When braking, the throttle
should be in the closed position. The brake light will
also illuminate.
E. Motor Stop Switch
When the switch (A) is
pressed, it will stop power to
the
motor controller. The motor
controller will remain in this
state until the ON
(B) button is
pressed. The switch does not
turn off
all electrical circuits,
just the operation of the motor.
A. High Beam Flash-to-Pass
When the headlight is in the low beam position, push
the flash-to-pass switch and the high beam will
illuminate and will stay illuminated until the switch is
released. When released, this switch will default back
to the low beam position. The high beam indicator
will also illuminate.
D. Throttle Control
Twist the throttle in a counter-clockwise rotation (A) to
energize the motor and start the motorcycle in a
forward direction. Release the throttle and it will snap
back to the closed position (B), de-energizing the
motor.
