4-11
The BMS will beep only under two circumstances:
•
When the motorcycle is turned ON, the BMS
will perform a self-test. It will always sound a
beep-signal when the test finishes. The
beep pattern reports the self-test result.
•
Whenever the key switch is ON, and the
power pack is nearly empty. The BMS will
continuously sound a warning when the power
pack is low. The warning will decrease in
frequency and will still emit when the motorcycle
is turned OFF.
A
Beeps
The BMS includes an electronic beeper sealed inside
the power pack. The beeper is located on the left
front of the power pack behind the opening (A). Do
not cover this opening, it is intentionally left open.
