6-13
Stage 3
If the critical temperature threshold of the motor
is reached:
You will not reach this stage without knowingly
ignoring stage 1 and stage 2.
•
A ten second sequence of close intervals of rapid
pulsing will be visible on the warning indicator
and then power to the motor will be disabled.
•
You must quickly find a safe place to park the
motorcycle.
•
When power to the motor is disabled the warning
indicator goes solid.
•
The motor should take no longer than about
10 minutes to cool.
•
When the warning indicator turns off you can
safely operate the motorcycle again.
•
Use the throttle sparingly at first to ensure that the
motor does not overheat.
Motor Temperature Disabled
This warning indicator is on solid. This is an
indication that the motor temperature sensor is not
detected. Check the connections to the temperature
sensor. The connection is located in the motor
cooling shroud near the top. If a problem is not found,
contact your CSC.
High Power Pack Temperature
If you see two fast blinks followed by two fast blinks
this indicates you need to let the power pack cool in
a well-ventilated location. If the high power pack
temperature still exists after the power pack has had
time to cool off, contact your CSC.
The next stage is the temperature warning indicator is
blinking rapidly, please pull over and allow the power
pack to cool off.
