4-21
Operating Your Motorcycle
Starting
1.
Turn the key switch to the ON position.
2.
Verify that the charge indicator reads fully charged.
3.
With the brake applied, press the motor stop
switch to the ON position.
4.
Release the brake and twist the throttle towards
you (counter-clockwise) to increase speed. When
the throttle is twisted away from you (clockwise),
the speed will decrease.
Braking
On the right side of the handlebar is a hand operated
brake lever. This brake lever controls the front brake
when the lever is squeezed. On the right lower side,
next to the foot peg, is the foot operated brake lever.
This lever controls the rear brake. When braking,
the throttle should be in the closed position.
The front and rear brakes should be applied together,
with a slight amount more braking on the front.
CAUTION:
If you apply the front or rear brakes hard
enough, it is possible to lock the wheels. This could
cause you to lose control of the motorcycle. We
suggest progressive use of the brakes to bring the
Zero motorcycle to a complete stop without locking
the wheels. Your Zero motorcycle is a light-weight
performance product and therefore practice is
recommended to safely perfect emergency stops.
Stopping
1. With the throttle in the closed position and the
brake applied, press the motor stop switch to the
OFF position. This switch can also be used in
an emergency to shut the motor off.
2. Turn the key switch to the OFF position and
remove the key. To prevent theft, the key should
be removed anytime the motorcycle is left
unattended.
3. Be sure to charge the power pack after each ride.
See Charging The Power Pack on page 4-14.
