background image

 OPERATION  
Carl Zeiss 

Illumination and contrast methods 

Axio Imager 

 

 
 
170 

430000-7344-001 

M70-2-0020 e   06/2009 

4.9.8

 

Setting reflected-light darkfield 

(1) Application 

The incident light darkfield technique is used to examine specimens that do not only have reflective 
surfaces of different reflectivity (ideal brightfield objects), but feature scratches, cracks, pores, or in a 
nutshell, deviations in plane surfaces. All these light-scattering details shine brightly in the darkfield whilst 
the reflective plane surfaces stay dark.  

 

 

(2) Instrument 

equipment 

 

Axio Imager MAT with connected and adjusted HAL 100 halogen illuminator. 

 

Epiplan-Neofluar, EC Epiplan-Neofluar, Epiplan objectives additionally labeled with "HD". 

 

Reflector module DF P&C, 6x20 compensator mount with darkfield stop for reflected light (424706-
0000-000) or 4-position modulator turret 

 

 

(3) Setting 

reflected-light 

darkfield

 

 

Prepare the microscope as described in Section 4.9.7 for reflected-light brightfield. The luminous-field 
diaphragm should just disappear from the field of view to avoid reflections. 

 

Rotate the reflector turret to move the DF P&C reflector module into the light path. 

 

When using the 6x20 compensator mount, remove the 6x20 slider, if necessary. When using the 
4-position modulator turret, set position 

H/D

 

Rotate the nosepiece to swing in the darkfield objective (HD). 

 

Fully open the aperture diaphragm and remove any neutral-density filter from the light path. 

 

Place the specimen on the stage and focus on it. 

 

Summary of Contents for Axio Imager



































































































































































































Reviews: