manualshive.com logo in svg

Zeiss Axio Imager, Operating Manual

Share
Download
Zeiss Axio Imager Operating Manual Download Page 130

 OPERATION  
Carl Zeiss 

Operating the motorized microscope via the touchscreen of the TFT display 

Axio Imager 

 

 
 
130 

430000-7344-001 

M70-2-0020 e   06/2009 

RL-illumination 

The light source to be employed in reflected light 
must be indicated here.  

If a switching mirror for two illuminators is used, 
this mirror will appear in this configuration menu 
following successful initialization. Operation is 
effected either via the function buttons (for 
allocation, see below), or the function concerned is 
automatically linked with the selection of an 
allocated reflector module, so that the user does 
not have to pay attention to any additional 
components. 

Sources of illumination:

 

−

 

None 

−

 

HAL int. 

−

 

HAL ext. 

−

 

HBO 

−

 

FluoArc 

−

 

HXP 

−

 

Colibri 

−

 

LED int. 

−

 

LED ext. 

−

 

VisLED int. 

−

 

VisLED ext. 

 

The addition "internal" or "external" denotes that 
the component is hooked up either to the power 
supply incorporated in the stand or to an external 
CAN bus power supply connected to the stand via 
CAN bus. 

 

Only types of lamps that are different can be 
configured. An error message will appear in the 
event of dual allocation. 

 

 

 

 

 

 

Fig. 4-78 

RL illumination 

 

Fig. 4-79 

RL illumination error message 

Summary of Contents for Axio Imager



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands