OPERATION
Carl Zeiss
Operating the motorized microscope via the touchscreen of the TFT display
Axio Imager
106
430000-7344-001
M70-2-0020 e 06/2009
(3) Reflector
tab
Depending on the reflector turret installed, 6 or 10
control elements for reflector positions 1 to 6 or 1
to 10 will appear. The reflector modules already
configured are recognizable by the text showing
on the button.
•
To swivel in the reflector module desired, press
the relevant button.
If the contrast manager is activated on this page
and if components valid for the contrast method
determined by the reflector module have been
installed, the appropriate method will be set.
Should this be impossible, the contrast manager
cannot be activated at this reflector position.
The transmitted-light contrast method last chosen
will be set at an empty or transmitted-light
position.
If an invalid reflector position is selected while the
contrast manager is active, the system will travel to
the position selected, but without the contrast
being adjusted. No contrast method will be
displayed.
The tab will not be available if no
motorized reflector turret is installed.
The active reflector module will only be
indicated in the status line (Fig. 4-23).
Fig. 4-34
Microscope -> Revolver -> Reflector