![background image](http://html1.mh-extra.com/html/zeiss/axio-imager/axio-imager_operating-manual_3338713110.webp)
OPERATION
Carl Zeiss
Operating the motorized microscope via the touchscreen of the TFT display
Axio Imager
110
430000-7344-001
M70-2-0020 e 06/2009
The light path can be controlled by pressing the
buttons. Various options are available,
depending on the type of component.
In Fig. 4-42, you can see how the first light path
switch in the 2TV tube is controlled, while
Fig. 4-43 shows how the second light path switch
in the 2TV tube is controlled.
If an eyepiece shutter is installed, the
Bino Shutter
option is displayed in the
Light path
tab.
The state of the eyepiece shutter is controlled
independently of the remaining light path by
pressing the
OPEN
and
CLOSE
buttons.
This tab will not be available in the
absence of a light switch.
One of the following schematic diagrams or a similar one is displayed in the control area to
show the light path. The configuration is determined during the microscope initialization
process. That is why tube changes must take place while the microscope is switched off.
Side Port
Eyepiece
50/50%
50%
Top Port
−
Only the motorized camera path deflection at the Side Port
is available. The deflection plane mirror is active.
−
A manual tube (no 2TV tube, no Bino Shutter (eyepiece
shutter)) is installed. The "Eyepiece" mirror is inactive and
the light path unknown.
Fig. 4-42
Light path switch 1 in 2TV tube
Fig. 4-43
Light path switch 2 in 2TV tube