START-UP
Carl Zeiss
Connecting to power
Axio Imager
54
430000-7344-001
M70-2-0020 e 06/2009
3.27
Connecting to power
3.27.1
Manual stand
•
Plug the power cable first into the power
connector (3-33/
1
) of the microscope and then
into a power outlet. The microscope can be
connected to a line voltage of 100 to 127 V or
200 to 240 VAC, 50/60 Hz. The power unit is
set
automatically
to the line voltage available.
3.27.2
Motorized stand
•
Plug connecting plug (3-34/
2
) of power supply
VP232-2 (3-34/
3
) into the corresponding
1
) on the rear side of the
stand.
•
Plug the power cable first into the power
connector (3-34/
4
) of the power supply
VP232-2 and then into a power outlet. The
power supply can be connected to a line
voltage of 100 … 240 VAC, 50/60 Hz. The
power unit is set
automatically
to the line
voltage available.
Fig. 3-33
Axio Imager, manual
Fig. 3-34
Axio Imager, motorized
