YOKOGAWA ZR202S, User Manual, Page: 73 / 163

<7. Startup>
7-10
IM 11M13A01-04E
Table 7.7 Minimum and Maximum Current Setting Procedure
Switch operation Display Description
> ∧
ENT
A 01
Display after the password has been entered.
> ∧
ENT
C 01
Set the oxygen concentration at 4 mA. Change the parameter code to C11.
Touch the [
∧ ] key to switch to Group C.
> ∧
ENT
C 0 1
Touch the [ > ] key to move the position of the digit that is flashing to the right.
> ∧
ENT
C 1 1
Touch the [ ∧ ] key to enter the numeric value to 1.
> ∧
ENT
0 00
Touch the [ENT] key to display the current set value (0% O
2
has been set).
> ∧
ENT
0 0 0
Touch the [ > ] key to move the position of the digit that is flashing to the right.
> ∧
ENT
0 1 0
Touch the [ ∧ ] key to change the numeric value to 1.
> ∧
ENT
010
If you touch the [ENT] key, all the digits flash.
> ∧
ENT
010
Touch the [ENT] key again to stop the flashing.
> ∧
ENT
C 11
Touch the [ENT] key once again, and the display will switch to the parameter code
selection display.
> ∧
ENT
C1 1
Set the oxygen concentration at 20 mA. Touch the [ > ] key to move the position of
the digit that is flashing to the right.
> ∧
ENT
C1 2
Touch the [ ∧ ] key to enter the numeric value to 2.
> ∧
ENT
0 25
Touch the [ENT] key to display the current set value.
> ∧
ENT
02 5
Touch the [ > ] key to move the position of the digit that is flashing to the right.
> ∧
ENT
02 0
Touch the [ ∧ ] key to change the numeric value to 0. The numeric value will change
from 5 to 6 ... to 9 and back to 0.
> ∧
ENT
020
If you touch the [ENT] key, all the digits flash.
> ∧
ENT
020
Touch the [ENT] key again to stop the flashing.
> ∧
ENT
C 12
Touch the [ENT] key once again to switch to the parameter code selection display.
> ∧
ENT Basic
panel
display
Touch the [ > ] key together with the [ENT] key to return to the basic panel display.
(This is not required if you proceed to make another setting.)(The displayed
numeric values indicate the measurement gas concentration.)
The symbol [ ] indicates that the key is being touched. Light characters indicates that the digits are flashing.