*2:
Used to cover the empty I/O module slot.
*3:
Required if the safety nodes are used.
n
Standard Type Safety Control Unit for Vnet/IP
The components of the standard type safety control unit for Vnet/IP (Model: SSC60S-S/
SSC60D-S) are shown in the following figure.
IMPORTANT
The operating temperature range of the standard type safety control unit for Vnet/IP is -20 to
40 deg. C. Be sure to use it within the range.
Processor module Power supply module
Utility unit (1 UNIT) (*1)
Base unit (5 UNIT) (*1)
External interface unit
Grounding
terminal
Cable tray
*1: 1 UNIT=44.45 mm
Such as Input/Output module
Figure 1.1-5 Configuration of Safety Control Unit for Vnet/IP (SSC60D-S)
Table 1.1-5 Model Names of Safety Control Unit for Vnet/IP Components (Standard Type)
Name
Standard type safety control unit for Vnet/IP
Single configuration
(SSC60S-S)
Duplexed configuration
(SSC60D-S)
Power supply module (100-120 V AC)
SPW481
2pcs
SPW481
2pcs
Power supply module (220-240 V AC)
SPW482
2pcs
SPW482
2pcs
Power supply module (24 V DC)
SPW484
2pcs
SPW484
2pcs
Processor module
SCP461
1pcs
SCP461
2pcs
Dummy cover (for processor module)(*1)
T9083VB
1pcs
-
-
Dummy cover (for I/O module)(*2)
SDCV01
as required SDCV01
as required
ESB bus coupler module(*3)
SEC402/
SEC401
2pcs
SEC402/
SEC401
2pcs
External interface unit for standard type safety con-
trol unit
-
1pcs
-
1pcs
*1:
For non-redundant configuration, used to cover the slot at right-hand side of the single processor module.
*2:
Used to cover the empty I/O module slot.
*3:
SEC402 or SEC401 is required for connecting the safety node units.
n
Wide Range Temperature Type Safety Control Unit for Vnet/IP
The components of the wide range temperature type safety control unit for Vnet/IP (Mod-
el:SSC60S-F/SSC60D-F) are shown in the following figure.
<1.1 Configuration of Safety Control Unit >
1-7
IM 32Q06C10-31E
4th Edition : Jan.30,2015-00
