Introduction
ProSafe-RS is a safety control system consisted of a safety control station (SCS) and a safety
engineering PC (SENG).
This User’s Manual describes the hardware of SCS and how to connect the control bus inter-
face card to SENG.
n
Structure of This Document
The purpose of this document is to help readers to fully understand the SCS hardware as well
as the hardware installation and maintenance so as to take full advantage of the hardware
performance.
This document consists of 8 chapters.
•
Chapter 1.
Hardware Configuration and Names of Components
Explains the input and output modules and peripherals used to construct the ProSafe-RS
system.
•
Chapter 2.
Installing Devices
Explains how to install the main parts of SCS hardware and the terminal boards and how
to reserve the service area.
•
Chapter 3.
Cable Connection
Explains the wiring methods of power supply cables, grounding cables and control bus
cables.
•
Chapter 4.
Configuration and Functions of Each Unit
Explains the features of the modules and units used for constructing the safety control
unit and safety node unit as well as the LED displays and major setting items.
•
Chapter 5.
Signal Cable Connection to Input/Output Modules
Explains how to connect the I/O modules with the field devices.
•
Chapter 6.
Control Bus Interface Card
Explains how to install the control bus interface card to the PC/AT compatible PC, how to
connect control bus cable to the interface card and how to set its station address.
•
Chapter 7.
Maintenance of ProSafe-RS Hardware
Explains the main methods on routine inspections, inspection through the system man-
agement window, online maintenance and periodical replacement of the parts (the parts
that have defined life span) as well as replacement procedures.
•
Chapter 8.
Relay Board
Explains the handling relay board, cable connection and maintenance.
i
Media No. IM 32Q06C10-31E (CD)
4th Edition : Jan. 2015 (YK)
All Rights Reserved Copyright © 2011 , Yokogawa Electric Corporation
IM 32Q06C10-31E
4th Edition : Jan.30,2015-00
