manualshive.com logo in svg

YOKOGAWA vigilantplant ProSafe-RS, User Manual

Share
Download
YOKOGAWA vigilantplant ProSafe-RS User Manual Download Page 199

Table 7.2.3-3 Setting of DIP Switches for Action Mode Setting (SW4)

Bit 6

OFF

Bit 5

FIX

OFF

Bit 4

PORT

OFF

Bit 3

OFF

Bit 2

DOMN

OFF

Bit 1

STA

OFF

4. Without connecting the cables for BUS1 and BUS2, install the processor module to the

base unit.

5. Push the START/STOP switch on the processor module to stop the module, and make

sure that the HRDY LED is OFF.

6. Keep the processor module at this status for about a minute.

7. Remove the processor module from the base unit.

Base unit 

Processor module 

Figure 7.2.3-1 Replacing the Processor Module

SEE

ALSO

For more information about DIP switches, refer to:

•

“

l

 SCP461” on page 4-4

•

“

l

 SCP451” on page 4-4

<7.2 Replacing Common Modules >

7-13

IM 32Q06C10-31E 

4th Edition : Jan.30,2015-00

Summary of Contents for vigilantplant ProSafe-RS










































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands