manualshive.com logo in svg

YOKOGAWA vigilantplant ProSafe-RS, User Manual

Share
Download
YOKOGAWA vigilantplant ProSafe-RS User Manual Download Page 112

4.9

Power Distribution Unit

The power distribution unit (Model: AEP7D, AEPV7D) needs to be ordered separately.
The power distribution unit receives the power supply from the designated input terminals and

outputs the power through the distribution connectors.
The safety control unit, safety node unit or optical ESB bus repeater does not have power

switch to turn on or off the power supply.
You need to plug or unplug the power supply cable from the power distribution connector for

turning the power on or off.

n

AEP7D Configuration

AEP7D can be used in a dual-redundant power supply scheme. The two power supplies may

use two separate power sources. Each power supply has seven distribution ports.

l

TM1, TM2 Terminals

These terminals (M4 screws) are used for connecting external power supplies.

•

L (+) : Ungrounded

•

N (-) : Grounded

l

Grounding terminal

The grounding wire can be connected to this terminal (M4 screw).

l

CN1 and Odd Number Connectors

CN1 and odd number connectors are the power distribution connectors.
In the dual power supply configuration, one power supply connected to TM1 terminal is dis-

tributed to the CN1 and odd number distribution connectors.

l

CN2 and Even Number Connectors

CN2 and even number connectors are the power distribution connectors.
In the dual power supply configuration, one power supply connected to TM2 terminal is dis-

tributed to the CN2 and even number distribution connectors.

For single power supply

For dual power supply

Power Input terminal

Power distribution connector 

(CN1 to CN14)

For AC power supply

+

For DC power supply

N

L

For AC power supply
For DC power supply

-

Grounding terminal

Grounding terminal

Figure 4.9-1 Power Distribution Unit

n

AEPV7D Configuration

AEPV7D can be used in a dual-redundant power supply scheme. The two power supplies

may use two separate power sources. Each power supply has seven distribution ports. The

two power supplies are independent from each other, and maintenance can be performed for

one supply while the other is supplying power.

<4.9 Power Distribution Unit >

4-25

IM 32Q06C10-31E 

4th Edition : Jan.30,2015-00

Summary of Contents for vigilantplant ProSafe-RS










































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands