manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, Getting Started Manual, Page: 52 / 220

Share
Download
YOKOGAWA ScopeCorder DL350 Getting Started Manual Download Page 52

2-19

IM DL350-03EN

Making Preparations for Measurements

1 

2 

3 

4 

5 

6 

App

Index

2.7  Connecting the DC Power Supply

Connecting to the Power Supply

Connect to a power supply the meets the following conditions and as shown in the figure below.

Item

Rated supply voltage

10 VDC to 30 VDC

Maximum power consumption

Approx. 45 W MAX

(High-Speed 100 MS/s, 12-Bit Isolation Module × 2)

  

DC INPUT

DC INPUT

DC power supply 

connector

Cable holder

Connecting the DC Power Cable

1.

  Connect the DC power cable plug to the instrument’s DC power supply connector.

2.

  Fix the DC power cable in place with the cable holder.

3.

  Connect the cigarette lighter plug to the DC power supply.

Removing the DC Power Cable

Remove the DC power cable from the instrument by reversing the procedure for connecting the DC 
power cable.

Note

•  If both the battery power supply and DC power supply are being supplied, the DC power supply takes 

precedence.

•  If both the battery power supply and DC power supply are being supplied and the DC power supply is cut 

off, the instrument instantly changes to battery power.

Summary of Contents for ScopeCorder DL350





























































































































































































































Reviews:

No comments