3-8
IM DL350-03EN
3.4 Configuring the Instrument Operation Using
the Navigation Screen
Select the following operation according to how the instrument is to be used.
• Scope mode
• Recorder mode
• Load setup file (Load file)
• Easy Setup (Easy Setup)
Scope Mode
Scope mode is used to set the time axis using Time/Div and record length. This is the typical time axis
setting method for oscilloscopes.
Recorder Mode
Recorder mode is use to set the time axis using the measurement time and sampling interval. This is
the typical time axis setting method for recorders.
Load Setup File (Load file)
Measurement conditions and other settings can be saved to an SD memory card or USB storage. The
saved setup file can be loaded later to configure the instrument before starting measurements. This
is useful when you want to set the measurement conditions at the office and then load them at the
measurement site to make measurements.
Easy Setup (Easy Setup)
The settings in recorder mode, described earlier, are configured in a wizard format.
When the configuration is complete, the instrument runs in recorder mode.