manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, Getting Started Manual, Page: 49 / 220

Share
Download
YOKOGAWA ScopeCorder DL350 Getting Started Manual Download Page 49

2-16

IM DL350-03EN

2.6  Connecting the AC Adapter

Connecting the AC Adapter

1.

  Connect the AC adapter’s plug to the instrument’s DC power supply connector.

2.

  Fix the AC adapter cable in place with the cable holder.

3.

  Connect the power plug to an outlet.

Removing the AC Adapter

Remove the AC adapter from the instrument by reversing the procedure for connecting the AC adapter.

Note

•  For details on the AC adapter, contact your nearest YOKOGAWA dealer.
•  If both the battery power supply and DC power supply are being supplied, the DC power supply takes 

precedence.

•  If both the battery power supply and DC power supply are being supplied and the DC power supply is cut 

off, the instrument instantly changes to battery power.

Summary of Contents for ScopeCorder DL350





























































































































































































































Reviews:

No comments