YOKOGAWA ScopeCorder DL350 Getting Started Manual Download Page 46

Page: 46 / 220

2-13

IM DL350-03EN

Making Preparations for Measurements

App

Index

2.5 Loading, Removing, and Charging the Battery Pack

• Pour toute information sur le transport aérien des batteries au lithium-ion, consulter les

exigences énoncées dans le Règlement de l’IATA sur le transport des marchandises
dangereuses (Section II pour les batteries au lithium).

ATTENTION

Le pack de batteries pèse environ 500 g. Éviter de le laisser tomber sur les doigts ou les orteils.

Removing the Battery Pack

On a soft, flat surface, place the instrument with the rear panel facing up.

Loosen the battery pack cover screws with a flat-bladed screwdriver until the screw head

moves up and down.

Lift and remove the battery pack cover.

Battery pack cover

Screw

Turn over the battery pack cover.

With your fingers, lift the side that does not have the battery pack terminal.

Pull the battery pack out in the direction of the arrow.

Battery pack

Lift with your finger.

Summary of Contents for ScopeCorder DL350





























































































































































































































Search results

Summary of Contents for ScopeCorder DL350

Reviews:

YOKOGAWA ScopeCorder DL350, Getting Started Manual, Page: 46 / 220

Search results

Summary of Contents for ScopeCorder DL350

Reviews: