manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, Getting Started Manual, Page: 23 / 220

Share
Download
YOKOGAWA ScopeCorder DL350 Getting Started Manual Download Page 23

1-1

IM DL350-03EN

1 

2 

3 

4 

5 

6 

App

Index

Names and Functions of Parts

1.1  Front, Rear, Side, and Top Panels

Front Panel

LCD

Description of the displayed contents → Section 1.3

Power switch

Turns the power on and off

→ Section 2.9

TRIGGER key

Press this key to make this instrument 

trigger regardless of the trigger settings.

→ Section 1.2

SAVE key

Saves data to a storage medium

→ Section 1.2

START/STOP key

Starts and stops waveform acquisition 

according to the trigger mode

→ Section 1.2

Rear Panel

Stand

Pull the stand out to use the instrument in a tilted position.

→ Section 2.2

Battery pack cover

(option)

Battery pack cover

Screws

→ Section 2.5

Chapter 1 

Names and Functions of Parts

Summary of Contents for ScopeCorder DL350





























































































































































































































Reviews:

No comments