YOKOGAWA DLM3022 User Manual Download | Manualshive

Page: 251 / 284

background image

21-4

IM DLM3054-01EN

Mail (Mail)

You can send trigger times and other information in emails to a specific email address as an action in the action-
on-trigger or GO/NO-GO determination feature.

Mail Server (Mail Server)

Specify the IP address of the mail server on the network that the instrument will use. In a network with a DNS
server, you can specify the host name and domain name instead of the IP address.

Mail Address (Mail Address)

You can specify multiple email recipient addresses. Separate each address with a comma.

Comment (Comment)

If necessary, you can enter a comment in the first line of e-mails.

Attaching Image Files (Attached Image File)

You can attach a capture of the screen that is displayed at the time the email is sent.
  File format: PNG
  File name: DLM_image[time].png
  (Example: DLM Image081202171158.png is a screen capture taken at 17:11:58 on December 2, 2008.)
  Resolution: XGA (1024×768 dots)
  Approximate File Size

Normal screen: Approx. 50 KB
Maximum: Approx. 1.6 MB (when the screen contains many colors)

Timeout (Timeout)

If the instrument cannot send an email for the amount of time specified here, it disconnects from the mail server.
Selectable range: 1 s to 60 s

User Authentication (POP3 before SMTP)

Before you send an e-mail, POP3 user authentication is performed.

• User Authentication On and Off

ON: Authentication is performed before e-mails are sent.
OFF: Authentication is not performed before e-mails are sent.

• Encryption type

U/P: The authentication data is sent in plain text.
APOP: The authentication data is encrypted before it is sent.

• Server name

Set the POP3 server host name or IP address using up to 30 characters. The characters that you can use are

all the ASCII characters on the keyboard.

• User name

Set the user name that is required for accessing the POP3 server from the instrument using up to 30

characters. The characters that you can use are all the ASCII characters on the keyboard.

• Password

Set the password that is required for accessing the POP3 server from the instrument using up to 30

characters. The characters that you can use are all the ASCII characters on the keyboard.

The instrument supports plaintext (U/P) and encrypted (APOP) POP3 user authentication.*

* APOP uses the MD5 algorithm (Message-Digest Algorithm 5 by RSA Data Security, Inc.).

Sending a Test Mail (Send Test Mail)

You can send a test mail to check whether emails can be sent properly.

21 Ethernet Communication (Network)

«
...
249
250
251
252
253
...
»

Summary of Contents for DLM3022





























































































































































































































































































Reviews:

No comments

Related manuals for DLM3022

Brand: ABB Pages: 11

Brand: iGuzzini Pages: 20

Brand: Datavideo Pages: 50

Brand: Waterous Pages: 90

Brand: Campbell Pages: 14

Brand: Yamaha Pages: 50

Brand: A&D Pages: 30

Brand: Barreto Pages: 20

Brand: Barreto Pages: 18

Brand: Backyard Discovery Pages: 41

Brand: Rainbow Pages: 18

Brand: dbx Pages: 2

Brand: Eagle Group Pages: 8

Brand: Taylor Pages: 60

Brand: TANDBERG Pages: 23

Brand: Backyard Play Systems Pages: 73

Brand: Madrigal Pages: 5

Brand: MacDon Pages: 504

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands