15-3
IM DLM3054-01EN
Detected Point Number (Pattern No.)
Specify the number of the detected point (the location where the search condition was met) you want to display
in the zoom window.
Detected points are numbered in order. The first detected point is zero.
The maximum detected point number is 50000.
Zoom Position (Z1 Position, Z2 Position)
You can change the zoom position in the zoom window that is specified using Result Window in the menu
accessible with the Search soft key. You can also link the analysis number (List No.) and zoom position settings.
Decoded Display (Decode)
The instrument decodes each field value and displays the decoded result using different colors for each field at
the bottom of the screen.
The following table shows the available decode display formats.
Decode Format
Hex
Dec
Bin
ASCII Symbol
Serial
bus
FlexRay
Yes
No
Yes
No
No
CAN
Yes
No
Yes
No
Yes
*
CAN FD
Yes
No
Yes
No
Yes
*
LIN
Yes
No
Yes
No
No
CXPI
Yes
No
Yes
No
No
SENT
Yes
Yes
No
No
No
UART
Yes
No
Yes
Yes
No
I
2
C
Yes
No
Yes
Yes
No
SPI
Yes
No
Yes
Yes
No
User Define
Yes
No
Yes
Yes
No
* You can display the decoded results using symbols by converting a CANdb file (.dbc) to a physical value/
symbol definition file (.sbl) using the free YOKOGAWA conversion software “Symbol Editor” and by loading
the file into the instrument.
Display Example
When Bin display is used, a bit order that is appropriate for the displayed waveforms is used regardless of the bit
order setting.
The bit order setting varies depending on the bus type.
CRC of FlexRay, CAN, CAN FD, I
2
C, SENT (except when the data type is User)
MSB
Data of LIN, CXPI
LSB
UART, SPI, SENT (when the data type is User)
LSB or MSB
Binary display
Hexadecimal display (bit order: LSB)
Hexadecimal display (bit order: MSB)
0 1 0 1 0 0 1 1
C
A
5
3
15 Analyzing and Searching Serial Bus Signals
