manualshive.com logo in svg

YOKOGAWA DLM3022, User Manual

The YOKOGAWA DLM3022 is a high-performance digital oscilloscope designed for precise waveform analysis. With its advanced features and intuitive user interface, this product ensures accurate measurements and reliable results. Discover the full potential of your device by downloading the free user manual from manualshive.com for comprehensive instructions and guidance.

Share
Download
background image

12-9

IM DLM3054-01EN

Statistical Processing of History Waveforms (History)

The instrument automatically measures items on the selected range of the history waveform and calculates 
statistics. The instrument calculates statistics from the oldest waveform. The statistics of the waveforms 
displayed in Time Stamp are calculated.

Executing Statistical Processing (Exec)

Executes statistical processing. You can use this command when the statistical processing mode is set to Cycle 
or History.

List Display (List)

Displays a list of calculated statistics. You can display this list when the statistical processing mode is set to 
Cycle or History.

•  Search Mode

  Searches for the specified item and highlights the detected line.

  OFF (disable), Statistics Max (maximum value), Statistics Min (minimum value), a≤Data (a value greater than 

or equal to the specified value), Data≤b (a value less than or equal to the specified value), a≤Data≤b (a value 

between two specified values)

•  Jump (When Search Mode is set to OFF)

  Jumps to and highlights the specified destination.
  Statistics Max (maximum value), Statistics Min (minimum value), Oldest, or Latest

•  Jump to Search Point (When Search Mode is not set to OFF)

  Jumps to and highlights the specified destination. You can specify any of the search results.
  If multiple maximum and minimum values are available, the data with the newest number is highlighted.
  Previous (previous data), Next (next data), Oldest, or Latest

• Sort

  Sorts the list in the specified order.
  Forward (from the oldest) or Reverse (from the latest)

•  You can also use the jog shuttle to specify the highlighted measured value.
•  In cyclic statistical processing, you can highlight a measured value to display one period of the 

corresponding waveform on the zoom display.

•  In statistical processing of history data, you can highlight a measured value to display the corresponding 

waveform.

12  Automated Measurement of Waveform Parameters

Summary of Contents for DLM3022





























































































































































































































































































Reviews:

No comments

Related manuals for DLM3022

Backyard Play Systems 4430 Assembling User Manual preview
4430
Brand: Backyard Play Systems Pages: 54
ACE INSTRUMENTS AFM-5 Quick Start Manual preview
AFM-5
Brand: ACE INSTRUMENTS Pages: 2
ODA LP Series User Manual preview
LP Series
Brand: ODA Pages: 103
Xebex Fitness ASK Owner'S Manual preview
ASK
Brand: Xebex Fitness Pages: 15
qeedo Buddy Manual preview
Buddy
Brand: qeedo Pages: 2
lancer BEV85 Quarterly Service Work Instruction preview
BEV85
Brand: lancer Pages: 3
lancer 2300 Series Installation Manual preview
2300 Series
Brand: lancer Pages: 12
R2 TST Instruction And Maintenance Manual preview
TST
Brand: R2 Pages: 26
MAHA MBT Series Operating Instructions Manual preview
MBT Series
Brand: MAHA Pages: 21
MAGUIRE PRS-20 Installation Operation & Maintenance preview
PRS-20
Brand: MAGUIRE Pages: 47
Nellcor Oximax NPB-40 Operator'S Manual preview
Oximax NPB-40
Brand: Nellcor Pages: 161
Nellcor OXIMAX N-600X Series Service Manual preview
OXIMAX N-600X Series
Brand: Nellcor Pages: 210
Oase OxyMax 100 Commisioning Manual preview
OxyMax 100
Brand: Oase Pages: 120
OAKWORKS PT series Instruction Manual preview
PT series
Brand: OAKWORKS Pages: 24
Olympus CLV-160 Maintenance Manual preview
CLV-160
Brand: Olympus Pages: 56
Qiagen TissueLyser II User Manual preview
TissueLyser II
Brand: Qiagen Pages: 48
Qiagen QIAcube User Manual preview
QIAcube
Brand: Qiagen Pages: 162
Qazqa 44083 Manual preview
44083
Brand: Qazqa Pages: 4

Brands by name

Popular brands

Load more brands