manualshive.com logo in svg

YOKOGAWA DLM3022, User Manual

The YOKOGAWA DLM3022 is a high-performance digital oscilloscope designed for precise waveform analysis. With its advanced features and intuitive user interface, this product ensures accurate measurements and reliable results. Discover the full potential of your device by downloading the free user manual from manualshive.com for comprehensive instructions and guidance.

Share
Download
background image

5-7

IM DLM3054-01EN

Notes about Action

  How the instrument operates when the action setting is Print or Save Waveform

•  The instrument operates based on the settings in the Print menu or FILE menu. If the auto naming feature 

in the FILE menu is off, files are saved using sequence numbers (Numbering). If it is not off, the files are 
saved using the specified method.

•  If the instrument’s internal storage is being accessed from a PC while an action is being executed, the PC 

may stop detecting the internal storage. If this happens, remove the USB cable connecting the PC to the 
instrument, wait a few seconds, and reconnect the cable.

 

Points to Consider When Configuring Action-on-Trigger

•  You cannot change settings while the action-on-trigger feature is active.
•  Exponential averaging is used.

  Notes about GO/NO-GO Determination

•  The instrument displays the determination results on the screen (the total number of results and the 

number of no-go results).

•  During GO/NO-GO determination, only the Abort soft key and RUN/STOP are valid.
•  The instrument automatically changes the trigger mode to Normal when it executes GO/NO-GO 

determination.

  Points to Consider when Setting the Action Setting to Print

•  If Print To is set to Multi on the PRINT menu, you cannot execute the action.

  Points to Consider When Setting the Action Setting to Save Waveform

•  Do not set the storage device’s root folder as the save destination.
•  If you set sequential numbering as the automatic naming method (using the FILE menu), as the number 

of saved files increases, the amount of time required to save a file will also increase. Also, the maximum 
number of files that can be saved using sequential numbering is 1000. To save more than 1000 files, set 
the automatic naming function so that files are named by date.

•  If you use the automatic naming function to save data to files, GO/NO-GO determination will stop if the 

same file name exists in the same folder. To prevent this from happening, you can either create a new 
empty folder before you start GO/NO-GO determination, or you can make sure that there are no files in the 
destination folder.

•  Up to 2500 files and folders can be displayed in the file list. If there are more than a total of 2500 files and 

folders in a given folder, the file list for that folder will display only 2500 files and folders. There is no way to 
set which files and folders are displayed.

  Points to Consider When Setting the Action Setting to Send Mail

•  The instrument operates based on the settings that you specified by pressing UTILITY and selecting 

Network > Mail. You can attach screen images to emails.

•  We recommend that you set a limit on the mail transmission number to avoid overloading the mail server.
  You can set the upper limit of mail transmissions using Mail Count.
•  If the specified number of mail transmissions is less than the number of specified actions, mail transmission 

will stop after the specified number of transmissions. If the specified number of mail transmissions is 
greater than the number of specified actions, mail transmission will stop after the specified number of 
actions.

5  Executing Actions

Summary of Contents for DLM3022





























































































































































































































































































Reviews:

No comments

Related manuals for DLM3022

OMCA 930 Use And Maintenance Manual preview
930
Brand: OMCA Pages: 72
Barko Hydraulics 930 Service Manual preview
930
Brand: Barko Hydraulics Pages: 92
BANLAW 800 Series Product Data Sheet preview
800 Series
Brand: BANLAW Pages: 32
Baker Instrument Company D6000 Digital Troubleshooting Procedures & Fault Listing preview
D6000
Brand: Baker Instrument Company Pages: 24
NEC NEAX 2000 IVS System Manual preview
NEAX 2000 IVS
Brand: NEC Pages: 54
Baroness TDA1200 Owner'S Operating Manual preview
TDA1200
Brand: Baroness Pages: 40
Baroness SP05 Owner'S Operating Manual preview
SP05
Brand: Baroness Pages: 40
BARKO LOADERS 295 Service Manual preview
295
Brand: BARKO LOADERS Pages: 85
Califone WT1 User Manual preview
WT1
Brand: Califone Pages: 7
CALITEK Grizzly 600 Manual preview
Grizzly 600
Brand: CALITEK Pages: 16
LAHTI PRO 46033 User Manual preview
46033
Brand: LAHTI PRO Pages: 20
LAHTI PRO 46017 User Manual preview
46017
Brand: LAHTI PRO Pages: 16
J&M 32 Series Operator'S Manual preview
32 Series
Brand: J&M Pages: 53
Qazqa 46060 Instruction Manual preview
46060
Brand: Qazqa Pages: 2
IDEAL 61-521 Instruction Manual preview
61-521
Brand: IDEAL Pages: 12
JB-Lighting P18 Operating Instructions Manual preview
P18
Brand: JB-Lighting Pages: 32
W&H MS Instructions For Use Manual preview
MS
Brand: W&H Pages: 72
Taylor C712 Operator Training preview
C712
Brand: Taylor Pages: 41

Brands by name

Popular brands

Load more brands