YASKAWA XTRAWARE - V3.0 Manual Download Page 18

Page: 18 / 263

The Main Screen Interface

XtraWare User Manual

Option

Icon

Description

Download
Program

Downloads a program to the XtraDrive
driver.

Download
Parameters

Downloads a set of parameters to the
XtraDrive driver.

Download
Cam

Downloads cam profiles to the XtraDrive
driver.

Upload

Uploads data from the XtraDrive driver.

Print
Program

Prints the current program.

Print
Parameters

Prints the parameter list, including their
values, on the printer. The parameters are
printed in tabular format.

Print Chart

Prints the currently displayed chart and its
corresponding data. See section

4.7.4,

Printing a Chart, for further information.

Exit Exits

from

XtraWare.

Note:

1) The ECAM-related options are only activated if an ECAM license
has been purchased.

3.2.2.

Edit Menu

The Edit Menu options are used to edit the command order of a program in

the Program window.

Table 2: Edit Menu Options

Option

Description

Cut

(Ctrl+X)

Deletes selected text or lines from the program and

places the selection on the Windows and XtraWare
clipboards.

Copy
(Ctrl+C)

Places a copy of selected text or lines from the program
on the Windows and XtraWare clipboards.

Paste
(Ctrl+V)

Inserts the contents of the XtraWare clipboard into the
program.

Summary of Contents for XTRAWARE - V3.0








































































































































































































































































Search results

Summary of Contents for XTRAWARE - V3.0

Reviews:

Related manuals for XTRAWARE - V3.0

Brands by name

Popular brands

YASKAWA XTRAWARE - V3.0, Manual

Search results

Summary of Contents for XTRAWARE - V3.0

Reviews:

Related manuals for XTRAWARE - V3.0

Brands by name

Popular brands