manualshive.com logo in svg

YASKAWA GA800 Series, Programming Manual

The YASKAWA GA800 Series user manual provides detailed instructions for maintenance and troubleshooting of this high-performance product. Download the manual for free from manualshive.com to ensure optimal functionality and longevity of your equipment. Gain access to essential information and guidance for effective operation of the GA800 Series.

Share
Download
background image

6

YASKAWA

TOEPYAIGA8002B GA800 Drive Programming

d4: Frequency Ref Up/Down & Hold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
d5: Torque Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
d6: Field Weakening /Forcing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
d7: Offset Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293

2.6

E: Motor Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295

E1: V/f Pattern for Motor 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295
E2: Motor Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303
E3: V/f Pattern for Motor 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
E4: Motor 2 Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
E5: PM Motor Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
E9: Motor Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313

2.7

F: Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316

F1: Encoder Option Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
F2: Analog Input Option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
F3: Digital Input Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
F4: Analog Monitor Option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329
F5: Digital Output Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
F6, F7: Communication Options and Ethernet Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335

2.8

H: Terminal Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357

H1: Digital Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357
Multi-Function Digital Input Setting Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
H2: Digital Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381
H2 MFDO Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383
MFDO Setting Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
H3: Analog Inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
H3: MFAI Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408
Multi-Function Analog Input Terminal Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413
H4: Analog Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419
H5: Memobus/Modbus Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422
H6: Pulse Train Input/Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426
H7: Virtual MFIO selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430

2.9

L: Protection Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435

L1: Motor Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435
L2: Power Loss Ride Through. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441
L3: Stall Prevention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 452
L4: Speed Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 462
L5: Fault Restart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463
L6: Torque Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466
L7: Torque Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472
L8: Drive Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475
L9: Drive Protection 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 483

2.10

n: Special Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484

n1: Hunting Prevention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484
n2: Auto Freq Regulator (AFR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486
n3: High Slip Braking (HSB) and Overexcitation Braking . . . . . . . . . . . . . . . . . . . . . . . . . . . . 487
n4: Adv Open Loop Vector Tune . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491
n5: Feed Forward Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494
n6: Online Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
n7: EZ Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498
n8: PM Motor Control Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 499

2.11

o: Keypad-Related Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 510

o1: Keypad Display Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 510
o2: Keypad Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517
o3: Copy Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 522

Summary of Contents for GA800 Series





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GA800 Series

Walimex Pro Excellence Instruction Manual preview
Excellence
Brand: Walimex Pro Pages: 68
Talgil DREAM 2 Manual preview
DREAM 2
Brand: Talgil Pages: 14
Tadao Musashi 3 Upgrade preview
Musashi 3
Brand: Tadao Pages: 2
YASKAWA U1000 iQpump Drive User Manual preview
U1000 iQpump Drive
Brand: YASKAWA Pages: 426
YASKAWA Motoman DX200 Safety Notes preview
Motoman DX200
Brand: YASKAWA Pages: 26
YASKAWA motoman NX100 Instructions Manual preview
motoman NX100
Brand: YASKAWA Pages: 210
YASKAWA Z1000 CIMR-ZU*A Series User Manual preview
Z1000 CIMR-ZU*A Series
Brand: YASKAWA Pages: 400
YASKAWA Z1000 CIMR-ZU*A Series Technical Manual preview
Z1000 CIMR-ZU*A Series
Brand: YASKAWA Pages: 466
Koer C35CBMS Manual preview
C35CBMS
Brand: Koer Pages: 6
Bardiani BBZK Manual preview
BBZK
Brand: Bardiani Pages: 96
Eaton CDAU-01/04 Instruction Leaflet preview
CDAU-01/04
Brand: Eaton Pages: 4
OPW PetroVend PV200 Options Installation preview
PetroVend PV200
Brand: OPW Pages: 2
SOMFY Situo 1 RTS Installation And Operating Manual preview
Situo 1 RTS
Brand: SOMFY Pages: 112
Vent-Axia SAC 5 Installation And Wiring Instructions preview
SAC 5
Brand: Vent-Axia Pages: 4
Festo CPX-CEC Electronic Manual preview
CPX-CEC
Brand: Festo Pages: 87
QUICK DAM Flood Gate Manual preview
Flood Gate
Brand: QUICK DAM Pages: 16
Sunricher SR-ZG9001T-RGBW Manual preview
SR-ZG9001T-RGBW
Brand: Sunricher Pages: 3
Zencontrol zc-iot-fc Quick Start Manual preview
zc-iot-fc
Brand: Zencontrol Pages: 2

Brands by name

Popular brands

Load more brands