2.11 o: Keypad-Related Settings
510
YASKAWA
TOEPYAIGA8002B GA800 Drive Programming
2.11
o: Keypad-Related Settings
o parameters
set keypad functions.
Note:
You cannot set these parameters with the optional LED keypad.
Table 2.72 Parameters You Cannot Set with the LED Keypad
No.
Name
o1-05
LCD Contrast Adjustment
o1-24 to o1-35:
Custom Monitor 1 to 12
o1-36
LCD Backlight Brightness
o1-37
LCD Backlight ON/OFF Selection
o1-38
LCD Backlight Off-Delay
o1-39
Show Initial Setup Screen
o1-40
Home Screen Display Selection
o1-41 to o1-46:
1st to 3rd Monitor Area Selections/Settings
o1-47 to o1-51:
Trend Plot 1 or 2 Scale Settings
o1-55 to o1-56:
Analog Gauge Area Selection/Setting
o2-27
bCE Detection Selection
No.
Name
o3-04
Select Backup/Restore Location
o3-05
Select Items to Backup/Restore
o3-06
Auto Parameter Backup Selection
o3-07
Auto Parameter Backup Interval
o4-22
Time Format
o4-23
Date Format
o4-24
bAT Detection Selection
o5-01
Log Start/Stop Selection
o5-02
Log Sampling Interval
o5-03 to o5-12:
Log Monitor Data 1 to 10
◆
o1: Keypad Display Selection
o1 parameters
select the parameters shown on the initial keypad screen and to configure the parameter setting units
and display units. These parameters also adjust the backlight and contrast of the LCD display.
■
Home Screen Display Format
o1-40 [Home Screen Display Selection]
changes the display of the monitor shown on the Home screen. You can show
numerical values or one of these three displays on the Home screen monitor:
Bar Graph Display
A - Select
Ux-xx [Monitors]
with
o1-24
,
o1-25
, and
o1-26
.
B - Configure display regions with
o1-
41
,
o1-43
, and
o1-45
.
C - Select display ranges with
o1-42
,
o1-44
, and
o1-46
.
Analog Gauge Display
A - Select
Ux-xx [Monitors]
with
o1-24
.
B - Configure display regions with
o1-
56
.
C - Select display ranges with
o1-55
.
