556
YASKAWA
TOEPYAIGA8002B GA800 Drive Programming
6.
Push
.
7.
Push
or
to select the monitor number to register, then push
.
Enter the three digits in “x-xx” part of monitor
Ux-xx
to identify which monitor to output. For example, to show
monitor
U1-01 [Frequency Reference]
, set it to "101" as shown in this figure.
The configuration procedure is complete.
◆
Show Monitors as Bar Graphs
The procedure in this section shows how to show a specific monitor as a bar graph. You can show a maximum of
three.
1.
Push
(Home) to display the HOME screen.
Note:
• [Home] appears in the upper right hand corner of the screen when in HOME mode.
• If [Home] is not shown on
, push
(Back) to show [Home] on
.
2.
Push
(Menu).
3.
Push
or
to select [Display Monitor], then push
.
4.
Push
or
to select [Display Bar Graph], and push
.
